Electrolysis Corrosion Elimination by the SeaBis System. Permanently. Testimonials click here.
Corrosion Education: SeaBis System eliminates electrolysis, electrolysis corrosion
|
Education, also, at SeaBis.com: |
|||||||
|
|
 |
| |||||
metal corrosion
Metal corrosion is caused by electrolytic action between damp or wet metal or heating / cooling systems via any dry to wet contact to the Earth. It is named electrolysis corrosion or electrolytic action. Electrolytic action is particles of metal being dissolved from your metal by battery current. Battery current is DC - Direct Current so always flows in the same direction. AC (Mains power) is Alternating Current that reverses direction every half cycle (Hertz or 1/60 or 1/50 second) so dissolved particles will be replaced every half cycle. So AC cannot cause electrolysis corrosion. All electronics must use DC. All electrolysis is eliminated by the SeaBis System under actual live use conditions - guaranteed in writing here. Testimonials here.
In doubt? Ask any manufacturing jeweller how he plates gold onto base metal. The gold is your (metal / engine / hull) damp or wet metal and the (jewelry) base metal is the Earth.
Initial advice is free, e-mail: Glen Bishop of SeaBis
Every day phone: Australia 61 then 08 8552 4711
Metal Corrosion Elimination:
Some call this stray current and others "rust".
The SeaBis System eliminates electrolysis corrosion , permanently, Testimonials with contacts here
•To download an explanation of electrolysis and the SeaBis System click
here